Commercial Painters Pleasanton

Commercial Painters in Pleasanton: Consider Temperature and Humidity

There are many situations which the best commercial painters in Pleasanton should earnestly consider when doing their job. They include temperature and humidity that may either have a positive or a negative effect on the paint, especially on how (and how long) it dries.

Temperature and humidity will pose little problems if you’re doing interior painting. But it’s going to be a significant concern if you plan to go out to paint the exteriors, especially if your business is in an area which experiences extreme and unpredictable weather conditions.

That’s why knowing when the best time is to paint outdoors is important, as well as knowing how to avoid painting in these extreme weather conditions. Having the right information can help you avoid exterior painting problems.

Here is a couple of rules of thumb when painting outside: if you’re using latex or acrylic paint, the ideal temperature should be at least 50 degrees Fahrenheit; and if you’re using oil-based paint, the ideal temperature should be 45 to 90 degrees Fahrenheit for at least 48 hours. But you can find special paints that are formulated for application under extreme temperatures, even as low as 35 degrees Fahrenheit!

Now, expect the worst-case scenarios when painting outside under extreme weather conditions. You can also check out the ways on how to prevent a bad paint job from happening due to such reasons.

Painting under cold temperatures

Painting in the bitter cold prevents the drying of paint altogether. The paint will fail to adhere properly to the surface. It will condense, thicken and become semi-solid. Since the paint still retains much of the moisture, it will sag and crystallize quickly.

But if you really had to paint outside in the cold, the trick is to do it during the daytime or just before nighttime falls. It’s because air temperatures drop below the freezing point during the evening. Since freshly applied paint still contains moisture, it will harden and crystallize under below-zero temperatures even before it starts to cure itself properly.

That’s why it’s extremely important to keep in mind that temperatures should be 45 degrees to 60 degrees Fahrenheit when you go out to paint during cold weather. Not just that – the temperature should remain within that range for at least two or three hours to give the paint enough time to cure itself properly.

Painting in hot temperatures

Paint needs heat to dry itself quickly. But painting under extremely hot weather is a different matter. The paint will dry too quickly before its lower layers have the chance to cure itself properly. This results in a variety of surface problems such as discoloration, cracking, blistering, bumps or “alligatoring.”

Paint brushes and rollers will also be affected by the extremely hot weather. They will dry quickly, become hard and turn stiff, making them unusable.

But what if you need to change the looks of your establishment for the summertime, for instance? Here are the ways to achieve an optimal painting job (as possible) by considering any of these tips:

  • Start painting early before the day gets too hot.
  • Do not paint under direct sunlight.
  • Try painting in the shade.
  • Try to use any covering (such as a vinyl tarpaulin) to provide shade over your work site.
  • When the surface gets too hot, stop painting for a while. Then resume painting just about an hour before sunset or during sunset, if you can.

Extreme weather changes

Nothing is more annoying than experiencing unpredictable and extreme weather changes during the day as you paint outside. One moment it is a nice, sunny day as you begin to paint…only to experience heavily clouded skies and rain showers later in the day. This result is slower drying and curing, and your entire paint job will be practically ruined.

The best possible solution to this problem is to paint during the late summer or early autumn. The best painting contractors in Pleasanton should consider these seasonal periods as the ideal time to do exterior painting. It’s because they are least likely to experience sudden and unpredictable weather changes.

Humidity

Aside from temperature, another issue that constantly haunts commercial painters is humidity, especially high humidity. Higher humidity means a higher level of dampness in the air, and this means the paint will dry and cure more slowly than expected. It’s because moisture will enter the paint film before it has the chance to dry itself. Besides, it will attract dust and soot. That’s why painting on a damp surface is a big no-no.

This problem can occur in both exterior and interior painting (especially when painting in poorly ventilated areas).

That’s why painters prefer to paint in low humidity when there’s less moisture in the air. The drier the air, the bigger the likelihood that the paint will dry and cure itself properly.

So how to prevent humidity from ruining your paint job? Here are some helpful tips:

  • Refrain from doing an exterior painting when the day gets late, as the temperature begins to drop, and humidity becomes high.
  • Paint on warm surfaces.
  • Paint in thin coats as it will allow the paint to dry quickly and properly.
  • When painting interiors, make sure that the area is well ventilated by opening doors and/or windows and turning on fans.

Temperature and humidity are some of the main concerns among best commercial painters in Pleasanton. When the weather sometimes gets too extreme, they would rather prefer to wait first until conditions become ideal again for painting, especially painting outdoors.

Commercial Painters in Lathrop Know How to Choose the Right Paint for the Surface

One of the benefits of hiring the best commercial painters in Lathrop is obviously their expertise. These professional painters are well trained in every aspect of their profession. They also know which types of paints and coatings to apply on a certain type of surface.

Of course, commercial painters also know all too well that proper cleaning and preparation of the surface will allow paints to coat well on the surface. The combination of the proper prep work and the right kind of paints will lead to an excellent finish.

Bare wood

Use a very fine sandpaper to smoothen the surface. Once completely smooth and level, remove the fine dust with a tack rag. Next, apply a stain-blocking primer on it. After priming, apply a latex or an oil-based paint.

Brick

Masonry such as brick may be time-consuming. A wire brush is the only effective tool to thoroughly remove dirt, dust, grime, soot as well as efflorescence or “chalking.” Brush them off in a gentle manner so as not to scrape out the mortar. Scrub the surface with soapy water and rinse thoroughly. Let it dry for 48 hours.

A quality latex primer should sufficiently coat the surface. However, an elastomeric paint is more recommended as it is specifically formulated for coating masonry. An elastomeric paint is formulated to close off the cracks, holes and gaps on the surface. It also creates a barrier to prevent moisture from entering the brick (since it has a porous surface), but it also allows the brick to “breathe” as to let the moisture to escape in the form of vapor.

Ceramic tile or porcelain
Using a 150-grit sandpaper, sand the surface – this will improve the adhesion of paint onto it. Next, clean the surface with TSP (trisodium phosphate) or any non-residue cleaner.

The ideal coatings for ceramic tile or porcelain is a fine-quality acrylic primer, and then an interior paint with a semi-gloss finish. Painting the grout with a contrasting color is a good idea, but you should do so with a steady hand.

Concrete

Remove dirt, grime, soot, and excessive mortar from the surface using a wire brush. Clean the surface with a TSP solution (or any non-residue cleaner). Rinse it completely and let it dry for 48 hours.

When painting concrete, an elastomeric paint is a good choice. Another alternative: since concrete is porous, apply it with a masonry sealer to close off the gaps, cracks and holes. Let it dry completely. Once dried, apply an acrylic primer before painting it with a good quality acrylic latex paint.

Drywall

If the drywall is new, make sure that it is free of dust by removing it with a damp rag. If the drywall has been previously painted, remove any loose paint if you find any. If there are cracks, holes and other surface imperfections, fill them with a spackling compound and let it dry. A good quality acrylic latex primer is recommended for this type of surface.

Metal

Remove dirt, loose paint or rust using a wire brush. Then smoothen it with a 220-grit sandpaper. Use plain water to wash it off and let it dry. (no need to clean it with soap)

Let it dry. Next, apply an exterior primer and topcoat it with a paint which is specifically made for metals.

Painted or sealed wood

First, clean the surface. A wet rag will do, but you can also use TSP (or any other non-residual cleaner) for surfaces with stubborn dirt, marks, etc. Smoothen the surface with sandpaper until completely level. A quality latex paint is a good choice for a topcoat.

If you plan to have your business painted but are not sure which types of paints to use, do not hesitate to ask the best commercial painters in Lathrop. They are ready to give you the best advice regarding the right paints for surfaces, as well as the best paint finishes and colors.

 

Commercial Painters Pleasanton: Best and Worst Office Colors

Every new season is the best way to refresh and renew our outlook in life. As for companies and commercial establishments, it’s also the best time to reset their goals and their vision, and to give their businesses a whole new branding.

Of course, along with the renewed goals and the vision, companies should not forget the more physical aspects of their business: that is, to give their establishments a refreshed look, from exteriors to interiors. Even just a fresh coat of paint will go a long way. If you are not too sure what kind of paint color should be right for your business, you can always consult the best commercial painters in Pleasanton and they will give you the best suggestions about the right paint colors.

It may sound trivial to say that the color of your office can affect the mood of your employees and clients, as well as your professional behavior and relationships with them. But it’s true – the colors painted on your office will greatly affect your mood. Choosing colors is as important as choosing   comfortable and ergonomically designed workspace furniture, tools, fixtures, etc. Companies know all too well that their employees’ mood and behavior can significantly affect the direction of their business. The right color palette will help employees focus more on their work and become more productive.

Businesses can choose colors which what they seem to them as appropriate. However, below is a general guide of the colors that you should use – and you should not use – for the office.

The best colors:

1) White, off-white or beige – Neutrals are often the best and safest bets for office painting. You cannot go terribly wrong with white, off-white or beige, as you can match this color with accent colors or the right kind of furniture. White, off-white or beige is economical as well. It is the best color to use for smaller office spaces, as it gives a bright enough look and the illusion of a bigger space.

2) Gray – Gray is another neutral color. You may be surprised to learn that gray is a good color, if you use the right shades. It’s not really a dull choice for an office color as many people perceive it to be. Gray is a soothing color that will help you ease down your stress, especially when things get really tense around the workspace. Plus, depending on the shade, gray is a versatile and easy-to-work color. It can be matched with other colors like brown, white, red, purple, green, etc.

3) Red – The color of passion and energy, red is believed to bring increased blood pressure and heart rate. Thus, if you are feeling groggy as you come to the office, some hits of red will help you to get yourself awake and energized. Red can also whet your appetite and stimulate closer communication and collaboration. However – except when used at fast-food establishments and restaurants – too much of red can also trigger negative emotions such as anger and anxiety, so it’s best to use it for an accent wall.

4) Brown – Brown is a calming and reassuring color, no matter what shade. But unlike blue and green, which engender a peaceful, tranquil or even a soporific effect. Instead, brown brings out an impression of confidence, credibility and security.

The worst colors:

1) Pink – Pink is the perfect choice for your little girl’s bedroom. But it’s definitely a no-no for the office space. Bright and vivid pink is too bold and too stimulating to the eyes that it can distract you from finishing your all-important deadlines. It’s best reserved for little office accents.

2) Yellow – Yellow has that image of being a happy and cheerful color. It’s the color of sunshine, sunflowers and lemonade. It can help boost people’s mood and inspire creativity. However, yellow is not the best bet to paint for your business, especially the entire office interiors. Just like pink, yellow is too bold, too stimulating and too distracting. It can even trigger intensely negative feelings such as frustration, anxiety and anger. It’s okay if you use yellow as an accent color. If you had to paint your office with yellow, the best way is to use white or softer shades of green, purple or blue to complement it.

3) Turquoise, bright green and bright red – At first, these colors may be attractive to the eyes. But imagine staring at these colors for long periods of time, and you may eventually feel irritable, uncomfortable or dizzy. These colors are also too distracting which prevents you from focusing on your job. Avoid using any of these colors on all four walls of your office.

While preferences also matter, you still have to consider the effect that color can have on office employees. That’s why the right colors for the office do matter, as they can encourage an atmosphere of energy, positive vibe, creativity, productivity, good business relationships and interaction – and when these things come together, they will make any business successful.

However, it’s also important to know that relaxation matters a lot. Choosing colors that are meant to recharge and re-focus one’s priorities are also great for some office spaces, especially when employees are going through a stressful workday or experiencing burnout.

Hiring the best commercial painters in Pleasanton is the best option because they have the experience and the expertise regarding the best colors and color combinations for any commercial spaces.