home painting Pleasanton

5 Reasons to Consider House Painting in Pleasanton

House painting in Pleasanton is beneficial in a lot of ways. Our homes give us protection and privacy, so they only deserve the best care, including the best paints. Here are the five reasons why you should consider painting your home:

1. To increase resale value
When you plan to move out and sell your home, it’s always better to re-paint it. Giving your home a fresh coat of paint will give you a better chance that your house will be sold more quickly. A freshly re-painted home with a well-placed and attractive color scheme will also easily nose out the competition. Even just painting the door, window frames, and trim can help boost your home’s resale price and attract potential buyers.

2. To improve the condition of your home
If your house is all worn-out, that’s a good opportunity to repair the surface and re-paint it. When your house has been standing for a long time (and hasn’t seen a paintbrush in many years), it has taken a lot of beating from many factors like weather conditions (moisture, too much or prolonged sun exposure and humidity, for some) and some impact. These things have led to many surface issues like fading paint, peeling or flaking paint, blistering paint, alligatoring, mold and mildew, chalking, and a lot more.

What’s good about re-painting your home is that it allows you to see the problem first, and then repair the affected surface. Always remember that preparation of the surface will bring back most of its old appearance and quality.

3. To increase your home’s curb appeal
Sometimes, we need to change the outside appearance of our home once in a while by making it look brand-new again. It just feels gratifying to see a new color and refreshed look in our abode. A newly re-painted home looks also inviting to guests as well.

4. To improve air quality
Re-painting your home regularly and using a good quality paint will help improve your home’s indoor air quality. It will help minimize dust, dirt, and other air pollutants. Re-painting your home also discourages the growth of mold and mildew (whose spores can be carried by air when disturbed).

If you or other members of the family are especially sensitive and suffer from respiratory conditions (such as asthma), you may want to forget using conventional paints and instead buy “green” or eco-friendly paints. These paints are all-natural and use ingredients like milk, clay, and even citrus fruits. Since these green paints have zero VOC levels, they emit no harmful chemical vapors.

5. To renovate your home in more affordable way
If you want to renovate your home but you don’t have a big budget for that, a fresh coat of paint and a new color scheme can dramatically transform your drab-looking home into an attractive and engaging space.

No matter which of the reasons you should choose, house painting in Pleasanton is always a good idea! You may go the DIY way or, better yet, choose to hire a professional contractor like Custom Painting, Inc. if you desire a smooth and flawless paint finish.

Saving Money When Exterior House Painting in Pleasanton

House painting in Pleasanton can be a costly thing to do. While one day you may do necessary upkeep of your home’s exterior, there some ways to cut back the expense without sacrificing the quality work that is done.

Maintaining your home’s exterior — which also includes painting and repairs — is a key to maintain the high value of your home’s property as well as to reduce future expenses. The fewer issues that your home’s exterior has to be repaired before starting on your paint, the less you will spend on preparing the surfaces.

A lot of homeowners choose to have the professionals do the work of exterior house painting in Pleasanton. For the budget-conscious homeowner however, this may not be a feasible option — but this may be possible if you discuss the matter with a professional painting contractor and make arrangements regarding the job to be taken. For instance, you may have to split the tasks between the two of you — you doing the prep work and the contractor doing the painting part. This will save the contractor time and you money. The paint contractor, as well as you the homeowner, will want such any agreement to be expressed in writing, because that paper will serve as protection for the both of you. However, it is likely that the contractor will not give any warranty since he will not be doing all the work himself. So it’s important that you discuss this matter with your contractor before arriving at the final decision.

Now that you and your contractor may have reached an agreement, you should know how the prep work on the surface should be done. It usually includes washing the surface, getting rid of mold and mildew, removing dirt, grease and grime, scrapping old peeling paint, repairing damage (if any), filling any gaps with caulk, and sanding.

But if you have decided to do the entire project by yourself, you will definitely save money. You will want all the surfaces to be prepped properly. Buy only good quality paints that your budget can afford, as the quality of the paint has much to do with the “finished product.” If you choose to buy cheaper paints, you may save a lot more money at the beginning of the project — but you should be aware that cheaper paints also mean cheaper and inferior quality. If you use cheaper paints, it is highly likely that you won’t be satisfied with the end result — colors fading, thin coating, etc. — considering the hours and the labor you’ve spent on the job. Buying premium quality paints may not be cheap, but at least it will last for more years before you will be required to paint again. This means that the price of buying expensive paints will be lower in the long run.

To make the paint last even longer, you will also want to use a good-quality primer. A primer is a preparatory coat which applied on prepped surfaces. This will help the paint adhere better to the surface and thus will give it an even result. It will also help reduce the number of coats of paint necessary to achieve the desired color and finish. These are just a few of the many ways you may be able to save money when doing exterior house painting in Pleasanton.

House Painting Pleasanton What to Do About Blistering Paint

One of the things that no one wants to encounter while house painting in Pleasanton is blistering paint on the exterior walls. Knowing what factors cause paint to blister is a vital part of discovering solutions on how to prevent it from happening again.

A blister refers to a paint problem where the top layer of paint raises above the layer beneath it. Have you seen these “bubbles” on the surface? Those are blistering paints. Unfortunately, there is no way for us to predict when the blistering will happen but there are ways to make it less likely to happen.

Moisture is the number one cause of blistering paint. Did you paint the exterior walls while it’s a bit rainy? Did the paint dry properly? Was the surface still wet as you started to paint it? Any of these may be the source of moisture which causes blistering paint. So the key solution to avoiding possibility of blistering paint is a thoroughly dry surface. It is important to make sure that all areas are completely dry before applying paint. Some areas like the basement and bathroom tend to be quite humid. If you’re painting in these areas, it’s important that you should take careful steps that will remove as much moisture from the area while you’re painting.

Mixing different paints types is another culprit of blistering paint, particularly on the exterior walls. For instance, the current paint on the walls is oil-based and you’re trying to coat a latex paint over it. Since heat leads to expansion and oil and latex respond to it differently, the blistering or bubbling occurs. It’s better to apply an a new coat of oil-based paint over a surface already painted with an oil-based paint, and a new latex paint over a surface already coated with a latex paint.

When you paint layers rather quickly, you may be encountering problems with heat which will cause the paint to bubble. The top layer may be dried before the lower layer, which will lead to solvents turning into vapors beneath the top layer. This results into blistering paint.

Dirt is also one of the common causes of blistering paint. When you apply paint on a dirty surface, the paint will change as it dries. It will shrivel just enough that areas that aren’t painted properly due to dirt will pull up off the surface below.

When you discover that the exterior walls have blistered paint, first scrape off the affected areas, and then sand. Make sure the surface is completely dried before painting. If blistering paint still reappears, inspect behind the wall (inside the room or the basement) to make sure that there isn’t a moisture problems that causes blistering.

These solutions may not be the sure-fire ways to prevent blistering paint in when house painting in Pleasanton, but they are a beginning place. At least knowing what causes it will give you an idea on how to avoid them as best as you can.

House Painting Pleasanton – Choosing Mixed Colors

Choosing colors for house painting in Pleasanton may be the most fun part of painting, but it doesn’t mean it’s less complicated. It’s no wonder, as there are a number of paint manufacturers offering a gazillion colors and shades, some of them with curious names. When you’re offered color chips to review and still can’t decide which the perfect shade is for your room, it’s suggested that you choose a custom mixed color that will match your belongings.

In order to attain custom mixed colors for your room, you have two ways to do it. One way is to mix the paint on your own. Buy a shade that is close to the color of your preference. Then start experimenting by lightening, darkening or deepening, or including undertones by adding paints of a different color. Another way is to take a sample of the color you want to the professional paint store or other related businesses in Pleasanton. They will take care of matching your sample with the help of computer technology. Of the two options, the latter is the easier way as the professionals will be the ones to match your samples with other colors via modern technology.

However, obtaining a sample may be difficult if the only sample you know of is on your walls (especially when they’re painted with the same color). It is suggested that you take pictures of your wall in varying light set-ups, and then print these pictures out. Once your paper is available make a good match with the walls then you’re good to go. The other way to obtain a sample is to cut a piece from your wall (preferably from an inconspicuous area of your room such as behind the switch plates) and bring it to the paint store. A 1″x2″ sample will do. If you are unable to find a larger section there, the other alternative is to find a secluded corner of your room and cut out a small piece, and then have the drywall repaired.

You can do the mixing and matching by yourself. It may be more difficult, but the good side of this is that you can also have fun in doing it. It will also give you a decent excuse to enjoy your creative side. This is the option you may want to take if the ideal color exists only in your imagination. Having a color wheel handy will be greatly helpful. During the course of your project you may also want to paint a sample piece of drywall which can be taken to the paint store to do computer color matching.

For the base shade, pick a couple of shades of the same color you prefer. Make sure that you get enough for your project, especially if you have to do some touchups. If your ideal shade is darker, slowly pour just a little black or gray paint into your base paint. A little bit of black will quickly make a recognizable difference in color. Slowly stir until it is well combined. If you prefer a lighter shade, you might gray instead of black.

To lighten your base shade, add white. But unlike adding dark or gray, you may need a lot of white paint to make a noticeable change in color. It is also ok if you have white as a base and then add the color you want to have lightened.

Other options for achieving custom colors are to add in more of one of its base colors. For instance, to make a dull gray more brilliant, choose a bright yellow to add to it. Or if you want to tone down the intensity of a color, add a paint of a complementary color (one of the colors that are opposite of it on the color wheel. Incorporate darker yellows for a warmer tone, or blue colors to achieve a cooler tone. Changing the hue, however, is a bit tricky, so begin by just having a base color that is already close to your preferred hue.

Custom mixed colors for house painting in Pleasanton may be a bit mind-boggling for sure, but it can also be fun and bring out your creative side. In the end you will achieve the colors you want for your space.